TrigJig Facebook Product Feed https://trigjig.us AF6 MKII Angle Finder https://trigjig.us/products/trigjig-af6-mkii-angle-finder?variant=39320318672980 AF6 MKII Angle Finder Default Title Introducing the ALL NEW TrigJig AF6 Angle Finder MKII The AF6 MKII sports two important upgrades on the original. First, the aluminium is now anodised to give A better, longer lasting finish to the tool. Second, the degree graduation scales are laser engraved directly on to the lower arm of the tool for unrivalled precision and longevity. The AF6 MKII is 100% CNC-milled from aluminum plate in-house and includes 3 recessed display windows that result in significantly improved precision. With 6" arms it fits in a pocket or tool belt easily. The recessed arrows in the windows are machined for a low profile, meaning they are down close to the the degree marks for accurate reading and so reducing parallax errors.  The 3 display windows include; protractor angle, miter angle and single butt joint angle. There is a handy extra scale for acute angles beyond 45 degrees to use with a pre-cut 45 degree block, allowing even tighter angles to be cut using a miter saw.  A scannable QR code can be used with our handy online crown holding calculator* for smart phones too. Just input the protractor reading and instantly get the calculated angle you need for more complex projects. The AF6 MKII comes backed by a 3 year manufacturer's warranty. Suitable for roofing, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! 6" (152mm) measuring arms Fully CNC machined from aluminum plate Anodised finish Laser engraved scales Protractor display Miter angle display Single Butt joint display Aluminum construction Heavy duty vinyl overlay 1° increments (>0.2°  accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 6577063067732 39320318672980 new 70.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0161_grande.jpg?v=1622928031 5060463290405 TrigJig TJAF6MK2 Tool TrigJig AF6 Stubby Angle Finder https://trigjig.us/products/trigjig-af6-stubby-angle-finder?variant=39370076127316 TrigJig AF6 Stubby Angle Finder Default Title Introducing the ALL NEW TrigJig AF6 Stubby Angle Finder, part of the MK II range. Ideal for areas with restricted access. The AF6 MKII Stubby sports two important upgrades on the original. First, the aluminium is now anodised to give A better, longer lasting finish to the tool. Second, the degree graduation scales are laser engraved directly on to the lower arm of the tool for unrivalled precision and longevity. The AF6 MKII Stubby is 100% CNC-milled from aluminum plate in-house and includes 3 recessed display windows that result in significantly improved precision. With a 6" arm and a half-sized 'stiubby' it fits in a pocket or tool belt easily. The recessed arrows in the windows are machined for a low profile, meaning they are down close to the the degree marks for accurate reading and so reducing parallax errors.  The 3 display windows include; protractor angle, miter angle and single butt joint angle. There is a handy extra scale for acute angles beyond 45 degrees to use with a pre-cut 45 degree block, allowing even tighter angles to be cut using a miter saw.  A scannable QR code can be used with our handy online crown holding calculator* for smart phones too. Just input the protractor reading and instantly get the calculated angle you need for more complex projects. The AF6 MKII comes backed by a 3 year manufacturer's warranty. Suitable for roofing, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! 6" (152mm) and half-sized measuring arm Fully CNC machined from aluminum plate Anodised finish Laser engraved scales Protractor display Miter angle display Single Butt joint display Aluminum construction Heavy duty vinyl overlay 1° increments (>0.2°  accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 6602916298836 39370076127316 new 70.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/e81224d8-10fc-46aa-b985-110a21aabcc7_grande.png?v=1622928167 5060463290412 TrigJig TJAF6S Tool TrigJig RSA12 Adjustable Rafter Square https://trigjig.us/products/trigjig-rsa12-adjustable-rafter-square-1?variant=39395069493332 TrigJig RSA12 Adjustable Rafter Square Default Title Introducing our NEW RSA12 Adjustable Rafter Square. The largest imperial Rafter Square by TrigJig. (metric version available here). Developed for quick and simple marking/laying out of roof trusses with the smart adjusting fence that locks in position for speed, ease and repeatability. With 6 marking gauges on the blade, the RSA12 Adjustable can be used in many carpentry and fabrication projects, though its speciality is for roofing and use with big lumber. The RSA12 is manufactured in-house from the highest quality European T6 4mm thick aluminum. We CNC machine each tool to tight tolerances, with right angle precision of +/- 0.008°  along the entire length.  The RSA12 has an anti-glare anodised surface to help with outdoor use on sunny days. The laser marked graduation rulers and parallel scribe scales are recessed in pockets to avoid wear over time. The degree lines are deep engraved so they won't rub off, and as they are made on the same CNC milling machine that profiles the square, the level of precision is excellent.  The adjustable silver anodised aluminum fence is also CNC machined and is fixed to the tool via nylon 66 bearings for smooth operation that snaps back to exactly 0° . The fence can be locked in place with a stainless steel thumb screw for repeatable cuts and marking super precise birds mouths, without any repeat measuring required. There are several features and marking gauges on the face of the tool, including; 12 inch rule (plus a smaller rule along the fence edge) Fixed deep engraved protractor gauge along the hypotenuse edge Rise and run protractor gauge (in degrees and fractions) Scribe lines for common timber dimensions every 1/4" 1/3rd scribe marks for common timber thicknesses Parallel slots Rise per foot of run table Rafter length per foot of run table The precision and workmanship from our manufacturing process is unrivalled and next level compared to mass produced, laser cut or cast rafter squares. The RSA12 Adjustable is built to an extremely high standard, designed for tradespeople who are looking for exceptional durability, design and quality from their tools.  Constructed from high quality 4mm aluminum High precision CNC machine profiled Adjustable CNC machined aluminum fence Anodised protective finish CNC laser marked graduation scales ***Limited quantity available. If ordered when out of stock your order will go into a queue and be despatched Express Delivery as soon as they are ready (ETA 2 weeks).***   ~section 2~  ~section 3 6611449970772 39395069493332 new 159.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/P1011165_grande.jpg?v=1625240490 5060463290443 TrigJig TJRSA12A Tool TrigJig RSA12 Fixed Rafter Square https://trigjig.us/products/trigjig-rsa12-fixed-rafter-square?variant=39395088629844 TrigJig RSA12 Fixed Rafter Square Default Title Introducing our NEW RSA12 Fixed Rafter Square, the same size as our RSA12 Adjustable but with a 'fixed' fence and spirit level. Developed for quick and simple marking/laying out of roof trusses and other carpentry tasks, made simpler and quicker thanks to a handy spirit level vial in the fence. The RSA12 Fixed is manufactured in-house from the highest quality European T6 4mm thick aluminum. We CNC machine each tool to tight tolerances, with right angle precision of +/- 0.008°  along the entire length.  The RSA12 has an anti-glare anodised surface to help with outdoor use on sunny days. The laser marked graduation rulers and parallel scribe scales are recessed in pockets to avoid wear over time. The degree lines are deep engraved so they won't rub off, and as they are made on the same CNC milling machine that profiles the square, the level of precision is excellent.  The two part silver anodised aluminum fence is also CNC machined and is fixed to the tool via 8 stainless steel machine head bolts. This houses a 40mm spirit level, visible from all four sides, and with a sensitivity of 0.5° per 2mm of bubble movement, makes it perfect for marking and finding level marks when roofing and timber framing. There are several features and marking gauges on the face of the tool, including; 12 inch rule (plus a smaller rule along the fence edge) CNC deep engraved protractor gauge along the hypotenuse edge Scribe lines every 1/4 inch 1/3rd scribe marks for common timber widths Parallel slots Rise per foot of run table Rafter length per foot of run table The precision and workmanship from our manufacturing process is unrivalled and next level compared to mass produced, laser cut or cast rafter squares. The RSA12 Fixed is built to an extremely high standard, designed for tradespeople who are looking for exceptional durability, design and quality from their tools.  Constructed from high quality 4mm aluminum High precision CNC machine profiled CNC machined aluminum fence 4-way visibility 40mm spirit level in fence Anodised protective finish CNC laser marked graduation scales CNC deep engraved protractor and rater scales ***Limited quantity available. If ordered when out of stock your order will go into a queue and will be despatched Express Delivery as soon as they are ready (ETA 2 weeks).*** ~section 2~  ~section 3~ 6611457376340 39395088629844 new 159.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/P1011170_grande.jpg?v=1625245874 5060463290450 TrigJig TJRSA12F Tool TrigJig AF6 MKII & Stubby Angle Finder Set https://trigjig.us/products/trigjig-af6-mkii-stubby-angle-finder-set?variant=39370268147796 TrigJig AF6 MKII & Stubby Angle Finder Set Default Title Introducing the All NEW TrigJig AF6 Angle Finder MKII Set. Including the standard AF6 MKII and the Stubby version, which has a 'stubby' arm. The AF6 MKII sports two important upgrades on the original. First, the aluminium is now anodised to give A better, longer lasting finish to the tool. Second, the degree graduation scales are laser engraved directly on to the lower arm of the tool for unrivalled precision and longevity. The AF6 MKII is 100% CNC-milled from aluminum plate in-house and includes 3 recessed display windows that result in significantly improved precision. With 6" arms it fits in a pocket or tool belt easily. The recessed arrows in the windows are machined for a low profile, meaning they are down close to the the degree marks for accurate reading and so reducing parallax errors.  The 3 display windows include; protractor angle, miter angle and single butt joint angle. There is a handy extra scale for acute angles beyond 45 degrees to use with a pre-cut 45 degree block, allowing even tighter angles to be cut using a miter saw.  A scannable QR code can be used with our handy online crown holding calculator* for smart phones too. Just input the protractor reading and instantly get the calculated angle you need for more complex projects. The AF6 MKII comes backed by a 3 year manufacturer's warranty. Suitable for roofing, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! Standard AF6 MKII and AF6 MKII Stubby 6" (152mm) measuring arms and a half-sized 'stubby' Fully CNC machined from aluminum plate Anodised finish Laser engraved scales Protractor display Miter angle display Single Butt joint display Aluminum construction Heavy duty vinyl overlay 1° increments (>0.2°  accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 6603013587028 39370268147796 new 138.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0162_grande.jpg?v=1622928518 TrigJig TJAF6MKIISET Tool Pack TrigJig Carpenter Square CS7 https://trigjig.us/products/trigjig-carpenter-square-cs7?variant=39265186971732 TrigJig Carpenter Square CS7 Default Title The new Carpenter Square CS7 has been designed for the workshop environment, where the quality and pride in craftsmanship in your own work and ours is paramount. The CS7 is fully CNC machined from the highest quality German cast aluminum tool plate. The single piece aluminum square is milled with several passes on our in-house CNC milling machines to ensure absolute squareness. On each side there are aluminum cheeks that are machined at the same time as the body to provide consistency in the squareness and part tolerance. The parts are then pressed together and secured using two stainless steel locating dowels. The CS7 undergoes a glass bead blasting process to provide a matt finish before then being anodised in our brand colours. The anodising creates a hard protective layer on the surface of the aluminum that offers corrosion and scratch resistance, as well as giving the CS7 the stylish and striking appearance that our customers have come to expect from TrigJig tools. There are two handy imperial scales on each side of the square to help with measuring, marking and laying out.  Fully CNC machined Accurate to at least 0.0085° over 12 inches British made Highest quality German cast aluminum  2 precision laser marked imperial  scales on each side Stainless steel location dowels Protective anodised finish ~section 2~ ~section 3~ 6544861495380 39265186971732 new 95.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/70ae8e6e-5125-4315-ab34-29d400098537_grande.jpg?v=1615245113 5060463290375 TrigJig TJCS7 Tool TrigJig Carpenter Square CS12 https://trigjig.us/products/trigjig-carpenter-square-cs12?variant=39265191592020 TrigJig Carpenter Square CS12 Default Title The new Carpenter Square CS12 has been designed for the workshop environment where quality and pride in craftsmanship in your own work and ours is paramount. The CS12 is fully CNC machined from the highest quality German cast aluminum tool plate. The single piece aluminum square is milled with several passes on our in-house CNC milling machines to ensure absolute squareness. This is abutted on each side by two aluminum cheeks that are machined at the same time as the body to provide consistency in the squareness and part tolerance. The parts are then pressed together using two stainless steel locating dowels with extra stainless steel machine screws to secure the cheeks. The CS12 undergoes a glass bead blasting process to provide a matt finish before then being anodised in our brand colours. The anodising creates a hard protective layer on the surface of the aluminum that offers corrosion and scratch resistance, as well as giving the CS12 the stylish and striking appearance that our customers have come to expect from TrigJig tools. There are two handy imperial scales on each side of the square to help with measuring, marking and laying out.  Fully CNC machined Accurate to at least 0.0085° over 12 inches British made Highest quality German cast aluminum  2 precision laser marked imperial  scales on each side Stainless steel location dowels Stainless steel machine screw fixings Protective anodised finish ~section 2~ ~section 3~ 6544863592532 39265191592020 new 120.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/820205e0-2aa3-4b9a-ba47-7d8997ea5227_grande.jpg?v=1615245730 5060463290382 TrigJig TJCS12 Tool TrigJig Carpenter Square Set CS7/CS12 https://trigjig.us/products/trigjig-carpenter-square-set-cs7-cs12?variant=39265198211156 TrigJig Carpenter Square Set CS7/CS12 Default Title The new Carpenter Squares (CS7 and CS12) have been designed for the workshop environment where quality and pride in craftsmanship in your own work and ours is paramount. The CS range are fully CNC machined from the highest quality German cast aluminum tool plate. The single piece aluminum square is milled with several passes on our in-house CNC milling machines to ensure absolute squareness. This is abutted on each side by two aluminum cheeks that are machined at the same time as the body to provide consistency in the squareness and part tolerance. The parts are then pressed together using two stainless steel locating dowels with the CS12 gaining extra stainless steel machine screws to secure the cheeks. The CS7 and CS12 undergo a glass bead blasting process to provide a matt finish before then being anodised in our brand colours. The anodising creates a hard protective layer on the surface of the aluminum that offers corrosion and scratch resistance, as well as giving the Carpenter Squares the stylish and striking appearance that our customers have come to expect from TrigJig tools. There are two handy imperial scales on each side of the square to help with measuring, marking and laying out.  Fully CNC machined Accurate to at least 0.0085° over 12 inches British made Highest quality German cast aluminum  2 precision laser marked imperial  scales on each side Stainless steel location dowels Stainless steel machine screw fixings Protective anodised finish ~section 2~ ~section 3~ 6544865198164 39265198211156 new 199.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/ab0c7cc4-546d-41e1-b747-9d9a9a0162e6_grande.jpg?v=1615246398 5060463290399 TrigJig TJCS7/12 Tool Pack TrigJig Angle Finder AF9 MKII https://trigjig.us/products/trigjig-angle-finder-af9-pro?variant=12651877728340 TrigJig Angle Finder AF9 MKII Default Title The NEW TrigJig Professional Angle Finder AF9 MKII Includes the new Quad Display Design, with the same Triple Display windows as the original AF9 Pro; protractor angle, miter angle and butt joint angle and now an outer scale showing rise and run angles. TrigJig Angle Finders use an upper arm to obscure all the lines and numbers you don't need, so your eye can focus on those you do. We go one step further and machine individual arrows that are painted with a bright red enamel paint to make taking readings even easier. The MKII Angle Finders are even more robust than before. Fully CNC machined from 1/4" aluminum with a protective anodised finish and precision scales lasered directly onto the lower arm that creates the most impressive and highly accurate site protractors we've ever made!   A dedicated handy online calculator for smart phones allows the user to input the protractor reading and instantly get the calculated angle they require for more complex projects. Includes a 3 year manufacturer's warranty. Suitable for roofing, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! 9" (230mm) measuring arms Fully CNC machined 1/4 aluminum with anodised finish Laser marked scales direct to the tool Protractor display Miter angle display Butt joint display Rise and run display Red enamel painted arrows 1° increments (>0.25° accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 1496597561428 12651877728340 new 125.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0079_grande.jpg?v=1622027462 5060463290405 TrigJig Tool TrigJig AF9 Stubby MKII https://trigjig.us/products/trigjig-af9-pro-stubby?variant=27773053894740 TrigJig AF9 Stubby MKII Default Title The NEW TrigJig Professional Angle Finder AF9 Stubby MKII The next level up from the standard Angle Finder AF6, the AF9 Stubby has one 9 inch measuring arm, with the opposite arm shortened to fit tight corners and to help set up miter saw/table saw blades and angles. Now with our NEW Quad Display Design, with the same Triple Display windows as before; protractor angle, miter angle and butt joint angle but with an extra outer scale showing rise and run angles. The MKII Angle Finders are even more robust than the previous AF Pro models. Fully CNC machined from 1/4" aluminum, now with a protective anodised finish and precision scales lasered directly onto the lower arms to create the most impressive and highly accurate site protractors we've ever made! A dedicated handy online calculator for smart phones allows the user to input the protractor reading and instantly get the calculated angle they require for more complex projects. Includes a 3 year manufacturer's warranty. Suitable for roofing, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! 9" (230mm) measuring arm and 'Stubby' arm Fully CNC machined 1/4 aluminum with anodised finish New Quad Display Design Protractor display Miter angle display Butt joint display Rise and Run scale Laser marked direct to tool 1° increments (>0.25° accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 3448480563284 27773053894740 new 125.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0093_grande.jpg?v=1622027412 5060463290191 TrigJig TJAF9PS Tool TrigJig Angle Finder AF16R MKII https://trigjig.us/products/trigjig-angle-finder-af16?variant=12419156574292 TrigJig Angle Finder AF16R MKII Default Title The TrigJig Angle Finder AF16R MKII The biggest Angle Finder in our range with up to 16 inches on each measuring arm has two major updates. The MKII Angle Finders are now even more robust. Fully CNC machined from 1/4" aluminum with a protective anodised finish and precision scales lasered directly onto the lower arm to create the most impressive and highly accurate site protractors we've ever made! The AF16R MKII includes the new Quad Display Design showing the protractor angle, miter angle, butt joint angle and an outer scale showing rise and run angles. The AF16R also includes a quick-reference lookup table for crown molding projects. The table clearly displays the miter and bevel settings for your miter saw based on the most common corner angles and crown molding spring angles (45° & 38° ).  The extra long, anodised aluminum measuring arms are ideal for measuring corners where drywall mud has been used as the longer arms can take better overall measurements from uneven surfaces than the smaller AF6 or AF9. A dedicated handy online calculator* for smart phones allows the user to input the protractor reading and instantly get the calculated angle they require for more complex crown projects.  3 year manufacturer's warranty included. Suitable for roofing, paving, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! 16" (406mm) measuring arms Protractor display Miter angle display Butt joint display Rise and Run display CNC machined 1/4" anodised aluminum construction Laser marked scales direct to the tool 1° increments (>0.25° accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 1406651138132 12419156574292 new 169.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0098_grande.jpg?v=1629451927 5060463290153 TrigJig Tool PSQ4 Pocket Square (Imperial) https://trigjig.us/products/ps-4-pocket-square?variant=28697660620884 PSQ4 Pocket Square (Imperial) Default Title The NEW and improved Pocket Square PSQ4. It's the perfect tool for carpenters. The innovative design of the PSQ4 results in a slim, robust little tool that fits in the palm of your hand. Engineered using robust stainless steel with an anti-glare surface and heavy duty protective satin clear coat, coupled to a CNC-milled and anodised aluminum fence. The PSQ4 has laser graduations every 1 degree around the outer edge to enable quick, easy and precise marking. There are also handy slots cut to the profile of a standard carpenter's pencil every 5 degrees for added precision when marking angles. The laser cut slots also facilitate the use of engineer's pencils too. A pivot point on the CNC-milled fence stock ensures each measurements with the PSQ4 is highly accurate. Laser cut oval holes at 1/32" intervals allow a snug fit for the pencil lead, and the anodised aluminum stock reduces friction to allow for smooth, easy gliding when marking lines parallel to the work piece edge. Also available as a 7 inch version PSQ7 Pocket Square 0-90 degrees 4" ruler 128 laser cut oval pencil slots (every 1/32") Hardened and tempered stainless steel design CNC-milled, anodised aluminum stock Corrosion resistant   3650411823188 28697660620884 new 79.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/PocketSq4__3_grande.jpg?v=1599781537 5060463290245 TrigJig PSQ4 Tool PSQ7 Pocket Square (Imperial) https://trigjig.us/products/psq7-pocket-square?variant=31870135828564 PSQ7 Pocket Square (Imperial) Default Title Introducing the NEW Pocket Square PSQ7. The perfect gauge tool for carpenters and engineers for those situations when the smaller PSQ4 is a little too, well, little. The innovative design of the PSQ7 results in a slim, robust tool that sits nicely in a belt pocket or on a tool wall. Manufactured using robust stainless steel with anti-glare finish and a heavy duty protective clear coat. This is coupled to a CNC-milled and anodised aluminum fence. The PSQ7 has laser graduations at 1 degree intervals around the outer edge to enable quick, easy and precise marking. There are also handy slots cut to the profile of a standard carpenter's pencil every 5 degrees for added precision when marking angles, and we've added a new profile design to allow the use of engineer's pencils too. The laser cut oval holes at 1/32" intervals allow a snug fit for the pencil lead for easy marking of lateral scribes, and the anodised aluminum stock reduces friction to allow for smooth, easy gliding when marking lines parallel to the work piece edge. Also available as a 4 inch version; PSQ4 Pocket Square 0-90 degrees 7 1/4" ruler Laser cut oval pencil slots (every 1/32") Hardened and tempered stainless steel design CNC-milled, anodised aluminum stock Corrosion resistant *Local sales tax may apply in Canada Standard Delivery ( 5-15 work days) ~section 2~ ~section 3~ 4516646322260 31870135828564 new 119.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/PocketSq7__4_grande.jpg?v=1599781615 5060463290337 TrigJig PSQ7 Tool Fabricator Square Dual 90 45 https://trigjig.us/products/fabricator-square-dual-90-45?variant=27773261021268 Fabricator Square Dual 90 45 Default Title The Fabricator Square Dual 90/45 The Dual 90/45 has several innovative features that make it a truly useful companion for fabricators and pipe fitters. The pair of brushed stainless steel squares are fixed in position with dowel spacers that allow the tool to sit free-standing on both box section and pipes of varying sizes. These spacers can be swapped out for longer spacers to allow the tool to sit on larger pipework if required. The cut away at each angle allows easy access for welding and checking welded corner angles and the stainless steel material helps with corrosion resistance and durability.  With both 90° and 45° degree corners the Fabricator Square Dual 90/45 should be a mainstay of workshops and site workers everywhere. 90°   and 45°  corners Robust stainless steel design Double square design for stability Self-supporting on pipework Corrosion resistant 14" x 7" (360mm x 180mm) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 3448500813908 27773261021268 new 129.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0016_grande.jpg?v=1562946787 5060463290221 TrigJig TJFSD9045 Tool Dual 65 Polygauge https://trigjig.us/products/dual-65-polygauge?variant=27773218685012 Dual 65 Polygauge Default Title The Dual 65 Polygauge is an innovative saw set-up tool designed by TrigJig. The dual stainless steel gauges are mirrored to enable the tool to be free-standing, without the need for to be held in place by hand or magnets.  The Dual 65 is a robust tool. Lazer cut from brushed stainless steel and CNC-Milled for maximum precision. The gauge is 6" at the widest diameter and includes 5 common angles for setting up miter and table saws and fences. The angles are marked on the vinyl graphic overlay which is large and easy to read. Supplied in a foam-lined protective plastic case and comes with our 3 year manufacturer's warranty. *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 3448494194772 27773218685012 new 119.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0027_242d9b03-1c29-4001-97a1-28c9c583df29_grande.jpg?v=1554914694 5060463290214 TrigJig TJD65 Tool TrigJig Angle Finder 9 & 16 MKII Set https://trigjig.us/products/trigjig-af9-af16-pro-set?variant=12651983896660 TrigJig Angle Finder 9 & 16 MKII Set Default Title The premium quality TrigJig AF9 and AF16R MKII Angle Finders are a lesson in hand tool engineering perfection made all the better with two new upgrades.  The MKII Angle Finders CNC machined aluminum bodies are now anodised for extra longevity and now, the precision scales are laser marked directly onto the tools for improved accuracy. The combination set includes both sizes of angle finders (9" & 16")  that have the new Quad Display Design; protractor angle, miter angle, butt joint angle and rise and run scales. The TrigJig Angle Finders utilise the upper arm with CNC machined, red enamel painted arrows to point to the numbers and marks you need, whilst hiding those you don't.  This makes it easier for the eye to concentrate on the scales and the lower machined arrows reduce parallax errors too! The set gives you the ability to use the smaller AF9 for intricate work, while the bigger AF16R is there for projects with longer runs, roofing and trim work. The AF16R is also geared up for crown molding installs and includes a handy look-up table for crown molding angles. If that's not enough, the QR code on the tool links directly to our neat online crown molding calculator! Includes a 3 year manufacturer's warranty. Suitable for roofing, drywall installs, carpentry, finish trimming, metal fabrication, framing, floor laying, marking and laying out, the applications are endless! 9" & 16" measuring arms Fully CNC machined 1/4 aluminum Laser marked scales direct to the tool Anodised finish Protractor display Miter angle display Butt joint display Rise & Run display Crown angle look up table 1° increments (>0.25° accuracy) *Local sales tax may apply in Canada Standard shipping (5-15 work days) ~section 2~ ~section 3~ 1496620564564 12651983896660 new 289.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0104_grande.jpg?v=1622027392 TrigJig Tool Pack TrigJig Crown & Baseboard Set https://trigjig.us/products/trigjig-set?variant=35649016969 TrigJig Crown & Baseboard Set Default Title Standard Domestic Shipping (5-15 days) Save even more time and effort and purchase a combined set with both TrigJig tools. *Local sales tax may apply in Canada Set contains: x1 TrigJig Crown Tool x1 TrigJig Base Tool ~section 2~ ~section 3~ ~section 3~Technical Specifications Trigjig Crown SKU: FR-0HJ9-O2IU Weight 0.8 kg Dimensions 22 x 29.5 x 6 cm GTIN 5060463290009 MPN TJC-08-01 TrigJig Base SKU: FV-2UJX-7QPQ Weight 1.5 kg Dimensions 15 x 15 x 2.5 cm GTIN 5060463290016 MPN TJS-06-01 (CR2450 batteries not included*) 9250249353 35649016969 new 280.00 USD out of stock http://cdn.shopify.com/s/files/1/1947/9399/products/trigjig-set-crown-coving-and-base-tools-main_grande.jpg?v=1537779228 5060463290009 TrigJig FR-0HJ9-O2IU Tool Pack TrigJig Crown https://trigjig.us/products/trigjig-crown?variant=34187445769 TrigJig Crown Default Title The world's first fully adjustable, digital miter tool for crown molding. Measure, automatically calculate angles and cut crown molding in minutes with one handy, compact tool. Suitable for both DIY users and construction professionals. The TrigJig Crown/Coving Miter was designed and developed for those projects where wall corners are not quite 90°. The tool utilises non-contact diametric magnets and an American made position sensor for precision of 0.1°. The powerful processor then instantly calculates the exact compound miter angle you need to create perfect corners. With pre-installed settings for spring angles and a super-handy electronic miter saw function (digital read out for miter saw settings to cut crown on the flat) it really does take out the stress and guesswork of crown molding installs.  The electronic module is attached to a sturdy and stylish brushed stainless steel chassis and the whole tool is adjustable and lockable by way of a simple high-force cam lever.  *Local sales tax may apply in Canada Product Features Fully adjustable Large Digital LCD screen for clear readings Measuring accuracy 0.1° Robust 1.2mm stainless steel construction Protective moulded EVA case Suitable for most sizes and profiles of crown molding Programmable spring angle Cam lever locks arms tight to prevent inaccurate cuts Magnetic cutting face guides hand saw for precision miters Li-ion Battery powered not included (1 x 3V CR2450 battery required) 3 year guarantee ~section 2~ ~section 3~Technical Specifications SKU: FR-0HJ9-O2IU Weight 0.8 kg Dimensions 22 x 29.5 x 6 cm GTIN 5060463290009 MPN TJC-08-01 (CR2450 batteries not included*) hardware > tools 9253518281 34187445769 new 149.00 USD out of stock http://cdn.shopify.com/s/files/1/1947/9399/products/CovingTool__4_grande.jpg?v=1599782168 5060463290009 TrigJig FR-0HJ9-O2IU Tool adult unisex TrigJig Base https://trigjig.us/products/trigjig-base?variant=35460572489 TrigJig Base Default Title TrigJig Base digital miter tool - an awesome tool for any toolkit. Fully adjustable you can measure any corner angle to 0.1° accuracy and calculate the miter joint required in less than 1/1000th  of a second! Infinitely faster than a sliding bevel thanks to the American-made microprocessor, the TrigJig Base gives you the option of cutting your baseboard with an electric miter saw by referring to the miter saw function (giving you the angle setting as a read out on the LCD). Or simply use the incredible magnetic cutting guides to use the tool as a jig to cut lengths of material with a hand saw! Ideal for situations where mains power is not available or the use of a heavy, bulky miter saw is not worth the extra effort of setting up. Fundamentally the TrigJig Base is an angle finder, calculator and miter saw all in one stylish handy package. The chassis is brushed stainless steel, ensuring it looks as good as it performs. Weighing about as much as a small book the TrigJig Base has proven to be an indispensable adjustable miter tool for home renovators and trim carpenters all over the globe. The TrigJig Adjustable, Digital Baseboard Miter is supported by full instruction videos and online support, as well as our leading 3 year manufacturer’s warranty. *Local sales tax may apply in Canada Product Features Fully adjustable Large Digital LCD screen for clear readings Measuring accuracy 0.1° Robust 1.2mm stainless steel construction Protective moulded EVA case Suitable for most sizes of baseboard Ideal for finishing jobs or awkward corner angles Cam lever locks arms tight to prevent inaccurate cuts Magnetic cutting face guides hand saw for precision miters Li-ion Battery powered *not included (1 x 3V CR2450 battery required) 3 year guarantee ~section 2~ ~section 3~Technical Specifications SKU: FV-2UJX-7QPQ Weight 1.5 kg Dimensions 15 x 15 x 2.5 cm GTIN 5060463290016 MPN TJS-06-01 (CR2450 batteries not included*) 9419910793 35460572489 new 149.00 USD out of stock http://cdn.shopify.com/s/files/1/1947/9399/products/TrigJig_Base_grande.png?v=1537778713 5060463290016 TrigJig FV-2UJX-7QPQ Tool PS-100 Pocket Square (metric) https://trigjig.us/products/ps-100-pocket-square-metric?variant=30271568609364 PS-100 Pocket Square (metric) Default Title The metric version of the PS-4. The innovative design of the PS-100 results in a slim, robust little tool that fits in the palm of your hand. Engineered using stainless steel and CNC-milled aluminum. The PS-100 has laser graduations every 1 degree around the outer edge to enable quick, easy and precise marking. There are also handy slots cut to the exact profile of a standard carpenter's pencil each 5 degrees for added precision when marking angles. A pivot point on the CNC-milled stock ensures each measurement on the PS-100 is highly accurate. Laser cut oval holes at 1mm intervals allow a snug fit for the pencil lead, and the polished aluminum stock reduces friction to allow for smooth, easy gliding when marking lines parallel to the work piece edge. 0-90 degrees 100mm ruler 100 laser cut oval pencil slots (every mm) Robust stainless steel design CNC-milled, polished aluminum stock Corrosion resistant *Local sales tax may apply in Canada ~section 2~ ~section 3~ 4123441332308 30271568609364 new 79.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/0W1A5069-2_grande.jpg?v=1626417440 5060463290238 TrigJig PS100 Tool TrigJig Rafter Square RS180 (Metric) https://trigjig.us/products/trigjig-rafter-square-rs180-metric?variant=32747878219860 TrigJig Rafter Square RS180 (Metric) Default Title **Shipping from 19th April** Introducing the brand NEW metric TrigJig RS180 Rafter Square. Developed for quick and simple marking/laying out of roof trusses with the smart adjusting fence that locks in position for repeatability. With more than 6 gauges lasered onto the face the RS180 can be used in many carpentry and fabrication projects. The RS180 face is made from laser cut and CNC machine profiled 2.5mm stainless steel, resulting in superb precision and robustness. The face has an anti-glare finish for outdoor use with laser marked graduations. These are coated with a heavy-duty satin clear coat, contributing to the anti-glare properties and helps provide excellent wear and corrosion resistance. The stylish adjustable blue anodised aluminum fence is CNC machined and is fixed to the blade by way of a nylon 66 bearings for smooth operation and a stainless steel locking thumb screw. There are several features and marking gauges on the face of the tool, including; 180mm ruler Fixed protractor gauge along the hypotenuse edge Adjustable rise and run protractor gauge (in degrees) Scribe lines every 5mm 1/3rd scribe marks for common timber thicknesses  2.5mm CNC machine profiled stainless steel face Adjustable CNC machined aluminum fence ~section 2~  ~section 3~ 4739638231124 32747878219860 new 119.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/DSC_0013_72f65c66-9364-4528-990c-e02fd3fe58ca_grande.jpg?v=1600018722 5060463290269 TrigJig TJRS180 Tool TrigJig RSA300 Adjustable Rafter Square https://trigjig.us/products/trigjig-rsa12-adjustable-rafter-square?variant=39395058909268 TrigJig RSA300 Adjustable Rafter Square Default Title Introducing our NEW RSA300 Adjustable Rafter Square. The largest metric Rafter Square by TrigJig. (Imperial version available here). Developed for quick and simple marking/laying out of roof trusses with the smart adjusting fence that locks in position for speed, ease and repeatability. With 6 marking gauges on the blade, the RSA300 Adjustable can be used in many carpentry and fabrication projects, though its speciality is for roofing and use with big timber. The RSA300 is manufactured in-house from the highest quality European T6 4mm thick aluminum. We CNC machine each tool to tight tolerances, with right angle precision of +/- 0.008°  along the entire length.  The RSA300 has an anti-glare anodised surface to help with outdoor use on sunny days. The laser marked graduation rulers and parallel scribe scales are recessed in pockets to avoid wear over time. The degree lines are deep engraved so they won't rub off, and as they are made on the same CNC milling machine that profiles the square, the level of precision is excellent.  The adjustable silver anodised aluminum fence is also CNC machined and is fixed to the tool via nylon 66 bearings for smooth operation that snaps back to exactly 0° . The fence can be locked in place with a stainless steel thumb screw for repeatable cuts and marking super precise birds mouths, without any repeat measuring required. There are several features and marking gauges on the face of the tool, including; 300mm rule (plus a smaller rule along the fence edge) Fixed deep engraved protractor gauge along the hypotenuse edge Rise and run protractor gauge (in degrees and fractions) Scribe lines for common timber dimensions 1/3rd scribe marks for common timber thicknesses Parallel slots Rise per metre of run table Rafter length per metre of run table The precision and workmanship from our manufacturing process is unrivalled and next level compared to mass produced, laser cut or cast rafter squares. The RSA300 Adjustable is built to an extremely high standard, designed for tradespeople who are looking for exceptional durability, design and quality from their tools.  Constructed from high quality 4mm aluminum High precision CNC machine profiled Adjustable CNC machined aluminum fence Anodised protective finish CNC laser marked graduation scales ***Limited quantity available. If ordered when out of stock your order will go into a queue and be despatched Express Delivery as soon as they are ready (ETA 2 weeks).*** ~section 2~  ~section 3 6611442565204 39395058909268 new 159.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/P1011156_grande.jpg?v=1625239974 5060463290429 TrigJig TJRSA300A Tool TrigJig RSA300 Fixed Rafter Square https://trigjig.us/products/trigjig-rsa300-fixed-rafter-square?variant=39395087843412 TrigJig RSA300 Fixed Rafter Square Default Title Introducing our NEW RSA300 Fixed Rafter Square, the same size as our RSA300 Adjustable but with a 'fixed' fence and bubble level. Developed for quick and simple marking/laying out of roof trusses and other carpentry tasks, made simpler and quicker thanks to a handy spirit level vial in the fence. The RSA300 Fixed is manufactured in-house from the highest quality European T6 4mm thick aluminum. We CNC machine each tool to tight tolerances, with right angle precision of +/- 0.008°  along the entire length.  The RSA300 has an anti-glare anodised surface to help with outdoor use on sunny days. The laser marked graduation rulers and parallel scribe scales are recessed in pockets to avoid wear over time. The degree lines are deep engraved so they won't rub off, and as they are made on the same CNC milling machine that profiles the square, the level of precision is excellent.  The two part silver anodised aluminum fence is also CNC machined and is fixed to the tool via 8 stainless steel machine head bolts. This houses a 40mm spirit level with an accuracy of 62' 2mm making it perfect for marking and finding level marks when roofing and timber framing. There are several features and marking gauges on the face of the tool, including; 300mm rule (plus a smaller rule along the fence edge) CNC deep engraved protractor gauge along the hypotenuse edge Scribe lines for common timber dimensions 1/3rd scribe marks for common timber thicknesses Parallel slots Rise per metre of run table Rafter length per metre of run table The precision and workmanship from our manufacturing process is unrivalled and next level compared to mass produced, laser cut or cast rafter squares. The RSA300 Fixed is built to an extremely high standard, designed for tradespeople who are looking for exceptional durability, design and quality from their tools.  Constructed from high quality 4mm aluminum High precision CNC machine profiled CNC machined aluminum fence Precise 40mm spirit level in fence Anodised protective finish CNC laser marked graduation scales CNC deep engraved protractor scale ***Limited quantity available. If ordered when out of stock your order will go into a queue and be despatched Express Delivery as soon as they are ready (ETA 2 weeks).*** ~section 2~  ~section 3~ 6611456786516 39395087843412 new 159.00 USD in stock http://cdn.shopify.com/s/files/1/1947/9399/products/P1011177_grande.jpg?v=1625241925 5060463290436 TrigJig TJRSA300F Tool